Current location：Home>Products>E-bike motor>Motor Kits>Controller
NC03 Controller for 12 fets
- Rated Voltage / DVC:
- 36V/48V
- Low Voltage protection / DVC:
- 30/42
- Max Current / A:
- 20A(±0.5A)
- Rated Current / A:
- 10A(±0.5A)
- Rated Power / W:
- 350
- Weight / kg:
- 0.3
- Operating Temperature / ℃:
- -20-45
Introduce
The controller is the centre of energy management and signal processing. All the signals of external parts such as the motor, display, throttle, brake lever, and pedal sensor are transmitted to the controller and then calculated by the internal firmware of the controller, and the appropriate output is applied.
Here is the 12 fets controller, it is usually matched with a 500W-750W motor.
Parameter
| Dimension Size | A(mm) | 189 |
| B(mm) | 58 | |
| C(mm) | 49 | |
| Core Date | Rated Voltage(DVC) | 36V/48V |
| Low Voltage protection(DVC) | 30/42 | |
| Max Current(A) | 20A(±0.5A) | |
| Rated Current(A) | 10A(±0.5A) | |
| Rated Power(W) | 350 | |
| Weight(kg) | 0.3 | |
| Operating Temperature(℃) | -20-45 | |
| Mounting Parameters | Dimensions（mm） | 189*58*49 |
| Com.Protocol | FOC | |
| E-Brake Level | YES | |
| Further Information | Pas Mode | YES |
| Control Type | Sinewave | |
| Support Mode | 0-3/0-5/0-9 | |
| Speed Limit(km/h) | 25 | |
| Light Drive | 6V3W(Max) | |
| Walk Assistance | 6 | |
| Test＆Certifications | Waterproof:IPX6 Certifications:CE/EN15194/RoHS | |
Enclosure Download
drawing.pdf
Last：no dataNext：NC02 Controller for 9 fets